13
Toshiba Blu-ray Disc™/DVD Player connections
Connecting to a TV
Connecting to the digital AV receiver/amplifier
It is important to connect the player to the Internet and AV devices first, before connecting the player to AC
power.
Connect a HDMI
TM
cable from the HDMI
TM
output jack on this player to the HDMI
TM
input jack on the TV.
An HDMI
TM
cable carries both video and audio signals. If you wish to use TV speakers, you do not need to
make an additional audio connection.
Route the sound from this player to the AV receiver/amplifier/sound system to enhance audio output.
Connect a coaxial cable from the COAXIAL DIGITAL jack on this player to the COAXIAL jack on the device.
Digital AV receiver/
amplifier
(Sample Illustration) Connecting to a TV - HDMI
TM
cable
(Sample Illustration) Connecting to a digital AV receiver/amplifier
Digital audio coaxial cable
(not supplied)
HDMI
TM
cable
(not supplied)
Do not expose the remote sensor to a strong light source such as direct sunlight or other
illumination. This can damage the sensor resulting in the inability to operate the player via
the remote control.
Do not drop or expose the remote control to electric shock.
Do not expose the remote control excessively hot or humid places to avoid moisture
condensation.
Do not spill water or place anything wet on the remote control.
Do not open the remote control unit (other than the battery door).
If the remote control is not going to be used for a long period of time, remove the batteries to
avoid damage caused by battery leakage corrosion.
Direct the remote control at the remote sensor of Toshiba Blu-ray Disc™/DVD player.
When using the remote control, press the buttons at intervals of approximately 1 second to
ensure the correct mode of operation.
Toshiba Blu-ray Disc
TM
/DVD Player connections
