1
E
ng
lis
h
6
Customizing
This. section. describes. the. various. setting.
option.of.this.Blu-ray.Disc™.player..
If.the.setup.option.is.greyed.out,.it.means
the.setting.cannot.be.changed.at.the
current.state.
General Setting
1..Press.SETUP.button.on.the.remote
control.The.Setup.Menu.appears.
System
Screen Saver
On
On
On
More...
More...
Language
Disc Auto Playback
Playback
CEC
Security
Load Default
Network
Upgrade
General Setting
SETUP
Exit
Move cursor key to select menu option
then use “OK” key to select
2
.
Press
to.select.an.option,.then.press
.to.access.
3
.
Press
/
to.select.a.setup.option.and
press
.
4
.
Select.the.setting.you.wish.to.change
and press OK to confirm.
-
Press
to.return.to.the.previous.menu.
[System]
To.change.the.following.system.option.to.
personalize your Blu-ray Disc™ player
.
•
[Screen Saver]
Turn.On.or.Off.the.screen.saver.mode.
It.helps.to.protect.the.TV.screen.
{.
On
.}.–.Set.the.screen.saver.active.
after.approximately.5.minutes.with.no.
operation..You.can.turn.off.the.screen.
saver.by.pressing.the.SETUP.button.
-.The.Blu-ray.Disc™.Player.will.switch.to.
standby.mode.if.there.is.no.operation.
after.the.screen.saver.is.engaged.for.
approximately.15.minutes.
{.
Off
.}.–.Turn.off.the.screen.saver.
mode.
•
[Disc Auto Playback]
Turn.On.or.Off.the.disc.automatic.
playback.switching.mode.
{
On
}.–.The.disc.playback.automatically.
after.loading.
{
Off
}.–.Turn.off.disc.auto.playback.
mode.
•
[CEC]
This.player.supports.REGZA-LINK.which.
uses.the.HDMI.CEC.(Consumer.
Electronics.Control).protocol..You.can.
use.one.single.remote.control.to.control.
all.REGZA-LINK-compliant.devices.that.
are.connected.through.HDMI.
connectors.
{
On
}.-.Turns.on.REGZA-LINK.features.
-With.CEC.on,.during.TV.standby.with.
the.Blu-ray
.
Disc™.Player.on,.pressing.
SETUP,.PLAY/PAUSE.will..power.on.the.
TV..When.you.turn.the.TV.off,.this.unit.
will.automatically.turn.off.
{
Off
}.-.Disables.REGZA-LINK.features.
•
[Load Default]
Reset.all.settings.of.Blu-ray.Disc™.Player.
to.initial.default.state.
-.Follow.the.instruction.on.the.TV.screen.
to confirm the default setting operation.
1..Select.
Load Default
.
2..A.dialogue.box.pops.up.shown.as.
below..Select.OK.
Load Default
Do you want to load default?
OK
Cancel
3.It.may.take.awhile.when.loading.
default.is.in.progress..Please.wait...
Load Default
30%
Loading default, please wait...
4..TV.will.display.as.follow:
OK
Next
Welcome
to the Toshiba Blu-ray Disc Player Setting
Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
5. Press OK, enter language setting.
..Press.OK,.enter.language.setting..
Press
/
to.select.a.language.option.
Previous
English
OK
Next
Choose
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
