15/15
●
Read retry timeout
(4) WRITE RETRY
●
The number of times
a tag write is retried
Set the timeout period during which RFID tag read retries
are allowed, with the
[UP]
or
[DOWN]
key. If the printer
has retried for the maximum number of times within the
RFID read retry timeout, the printer stops the retries at this
time.
Whenever the printer writes data onto an RFID tag,
the tag is read first. The read retry timeout set by this
parameter also becomes effective in this pre-read.
(Default value: 4.0 seconds)
Set the maximum number of retries to write data onto
an RFID tag.
The printer retries to write data onto an RFID tag for
up to the specified number of times. If the timeout
period expired before the maximum number of retries
have been done, the printer stops the retries at this
time.
(Default value: 5 times)
●
Write retry timeout
Set the timeout period during which RFID tag write retries
are allowed, with the
[UP]
or
[DOWN]
key.
If the printer has retried for the maximum number of times
within the RFID write retry timeout, the printer stops the
retries at this time.
(Default value: 2.0 seconds)
PRINTED IN JAPAN
EO2-38118
9.9 sec.
9.8 sec.
0.1 sec.
0.0 sec.
255
254
1
0
9.9 sec.
9.8 sec.
0.1 sec.
0.0 sec.
© 2017 TOSHIBA TEC CORPORATION All Rights Reserved
1-11-1, Osaki, Shinagawa-ku, Tokyo 141-8562, JAPAN
