background image

APPENDIX 4 SYSTEM MODE 

EO1-33029 

A4.4 Printer Parameter Fine Adjustment 

 

A4-10 

A4.4 Printer Parameter 

Fine Adjustment 
(Cont.) 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct 
Print) 
 

With this parameter you can fine adjust the Print Tone.  When 
“<3>ADJUST SET” appears, press the 

[PAUSE]

 key 5 times to enter 

the Print Tone Fine Adjustment (Thermal transfer print) menu. 
 
 
 
To change the screen to the Print Tone Fine Adjustment (Thermal direct 
print), press the 

[PAUSE]

 key again.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

[FEED]

 key: Pressing the 

[FEED]

 key one time causes a –1 tone change, 

up to –10 tones. 

[RESTART] 

key: Pressing the 

[RESTART]

 key one time causes a +1 

tone change, up to +10 tones. 
 

After completing the fine adjustment, press the 

[PAUSE]

 key. 

 
 
 
 
 
 

 

NOTES: 

• 

The fine adjustment value 
equals the sum of the fine 
adjustment values set by the 
PC command and this 
parameter.  The maximum 
print tone fine adjustment 
value is 

±

10 (Thermal 

Transfer Print) or +7 and –10 
(Thermal Direct Print).  When 
the value reaches the 
maximum, the value remains 
unchanged even if the 
subsequent fine adjustment is 
performed. 

• 

This is useful when print tone 
is required to be fine adjusted 
e.g.) When the ribbon is 
changed to different type. 

721($'-'!

[RESTART] 

[FEED] 

721($'-7!

721($'-7!

721($'-7!

721($'-7!

721($'-7!

721($'-7!

721($'-'!

721($'-'!

721($'-'!

721($'-'!

721($'-'!

Darker 

Lighter 

Standard 

Thermal Transfer Print 

Thermal Direct Print 

Thermal Transfer 

Thermal Direct 

Summary of Contents for B-850





















































































































Reviews: