APPENDIX 2 MESSAGES AND LEDS
EO1-33032
APPENDIX 2 MESSAGES AND LEDS
A2- 1
APPENDIX 2 MESSAGES AND LEDS
Appendix 2 describes the LCD messages displayed on the operation panel.
Symbols in the message
1:
: The LED is illuminated. ~: The LED is flashing. z: The LED is unlit.
2:
****:
the remaining number of labels to be printed. Up to 9999 (pieces)
3:
%%%%%%%:
ATA Card’s remaining memory 0 to 9999999 (in K bytes)
4:
###:
Flash memory card remaining memory for PC save area: 0 to 895 (in K bytes)
5:
&&&&:
Remaining flash memory capacity for storing writable characters 0 to 3147 (in K bytes)
LED Indication
No.
LCD Message
POWER ONLINE
ERROR
Printer Status
Restoration
by RESTART
key Yes/No
Acceptance of
Status Request
Reset Command
Yes/No
21 /,1(
z In online mode
-----
Yes
1
21 /,1(
~
z
In online mode (The printer is receiving
a communication)
----- Yes
2
+($' 23(1
z
z
The print head block is opened in online
mode.
----- Yes
3
3$86(
z
z The printer is paused.
Yes
Yes
4
&2006 (5525
z
A parity, overrun, or framing error has
occurred during communication through
the RS-232C port.
Yes Yes
5
3$3(5 -$0
z
The media has jammed during feed.
Yes
Yes
6
12 3$3(5
z
The media has run out, or the media is
not loaded correctly.
Yes Yes
7
5,%%21 (5525
z
The ribbon has run out, or has snapped.
A problem has occurred with the sensor
that determines the torque for the ribbon
motor.
Yes Yes
8
+($' 23(1
z
Feeding or printing was attempted with
the print head block open.
Yes Yes
9
&29(5 23(1
z
Feeding or printing was attempted with
the top cover open.
Yes Yes
10
3,1&+ 23(1
z
Feeding or printing was attempted with
the pinch roller raised.
Yes Yes
11
3((/ 23(1
z
Feeding or printing was attempted with
the strip pinch roller unit open.
Yes Yes
12
*8,'( 23(1
z
Feeding or printing was attempted with
the media guide plate removed.
Yes Yes
13
(;&(66 +($' 7(03
z
The print head has overheated.
No
Yes
14
6$9,1*
RU
6$9,1*
z
In writable character or PC command
save mode
----- Yes
15
)/$6+ :5,7( (55
z
An error has occurred while formatting
the flash memory or ATA card.
No Yes
16
)250$7 (5525
z
An erase error has occurred in
formatting the flash memory or ATA
card.
No Yes
17
)/$6+ &5' )8//
z
Data cannot be stored because the flash
memory or ATA card is full.
No Yes
18
+($' (5525
z
There is a problem with the print head.
Yes
Yes
19
Display of error
message (See Notes.)
z
The data analyzer has found an error in
the displayed command.
Yes Yes
Summary of Contents for B-492L
Page 1: ...TEC Barcode Printer B 492L R TH10 SERIES Owner s Manual ...
Page 85: ......
Page 86: ...E PRINTED IN JAPAN EO1 33032 ...