manualshive.com logo in svg

Toshiba B-492L, Owner'S Manual

Share
Download
Toshiba B-492L Owner'S Manual Download Page 38

6. PRINTER OPERATION 

EO1-33032 

6.2 Installing the Printer Drivers

 

6- 3 

6.2.2  Driver Installation 

 

 (Cont.) 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. 

Click on the 

Next

 button to continue the installation.  The screen will 

change to the Software License Agreement screen.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

7.

  Carefully read the Software License Agreement.  To accept the 

conditions of the agreement, click on the 

Yes

 button.  If you do not 

accept the conditions click on the 

No

 button.  

8. 

Upon clicking on the Yes button, the screen will change to list the 
available TEC driver sets.  For this printer, select “TEC B-492” and 
click on the 

Next

 button.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

9.

  The screen will change to the following.   

When the printer is directly connected to this PC, select “Local 
Printer”, otherwise, select “Network Printer”.  Then click on the 

Next

 

button.  

 
 
 
 
 

NOTE: 

If you click on the 

No

 button 

in the License Agreement 
screen, the program will not 
be installed.  

Summary of Contents for B-492L























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands