EO1-33013
27
5.3 Supplies
5.3.1 Label Stock
B-443 is capable of both direct thermal and thermal transfer printing. Many
different direct thermal or thermal transfer stocks can be used. Refer to the
following list for specifications of compatible label media.
Media
Specification
Label
Tag
Min. 1” (25.4 mm)
Min. 1” (25.4 mm)
Paper Width
Max. 4.49” (114 mm)
Max. 4.49” (114 mm)
Paper Weight
Less than 240 g/m
2
Length (Pitch)
0.4” (10 mm) ~ 90” (2286 mm)
0.4” (10 mm) ~ 90” (2286 mm)
Thickness
0.002” (0.05 mm) ~ 0.008” (0.20 mm)
Inner roll diameter. Max. 4.3” (110 mm)
Max. Roll Diameter.
(1” core)
External roll diameter. Max. 8.4” (214 mm)
Roll Up Method
Print surface is wound outside as standard
Paper Core ID.
φ
25.7 ± 0.3 mm
5.3.2 Ribbon
Standard 300m by 60 or 110mm thermal transfer ribbons with wax, wax-resin, or
resin coating (wound outside) are available from TOSHIBA TEC
CORPORATION. Of ribbon selection, it is recommended that the ribbon be at
least as wide as the print media. Also, the ribbon end should be transparent.
Summary of Contents for B-443
Page 1: ...TEC Bar Code Printer B 443 Owner s Manual ...
Page 5: ...EO1 33013 iii 5 2 Options 26 5 3 Supplies 27 5 3 1 Label Stock 27 5 3 2 Ribbon 27 ...
Page 14: ...EO1 33013 7 2 5 External Label Roll Mount Figure 4 External label roll mount ...
Page 23: ...EO1 33013 16 Figure 10 Installation of label stock and thermal transfer ribbon ...
