E11-1
11. GENERAL MAINTENANCE
ENGLISH VERSION EO1-33014
Fig. 11-2
11.1 Cleaning
11.1 Cleaning
To help retain the high quality and performance of your printer it should be regularly cleaned. The
greater the usage of the printer, the more frequent the cleaning. (i.e. low usage = weekly: high usage
= daily).
1.
Turn off the printer.
2.
Open the media cover.
3.
Remove the media roll from the printer.
4.
Clean the print head element with the print head cleaner.
5.
Wipe the cutter platen and strip roller with a soft cloth moistened with alcohol. Remove dust or
foreign substances from the internal parts of the printer, if any.
6.
Remove paper particles or stains from the feed gap sensor, black mark sensor, and the strip
sensor with a soft cloth.
NOTE:
Be sure to use the provided print head cleaner. Please order it to your authorized
TOSHIBA TEC representative if necessary.
11. GENERAL MAINTENANCE
WARNING!
1.
Be sure to turn off the printer prior to performing any maintenance.
2.
Do not use any tool that may damage the print head.
3.
DO NOT POUR WATER directly onto the printer.
Print Head Cleaner
Cutter
Strip Roller
Feed Gap Sensor
Black Mark Sensor
Platen
Fig. 11-1
Strip Sensor
Print Head
