8
RESUME FUNCTION
(POWER FAILURE RECOVERY)
1
2
SUPER SPIN DRY
■
The amount of laundry/once of spin
Less than 5.0 kg
■
Setting time for spinning
•
You can manually set the time of spinning according to
the following guide:
If you would like to shorten the time of drying clothes in
the room: 45 min
If you would like to almost dry the synthetic clothes: 90 min
■
The clothes which cannot be performed spin drying
“SUPER SPIN DRY” program will use a long time to
spin with high speed. Please do not spin the following
clothes:
•
Easily color bleeding clothes
•
Easily wrinkled clothes (e.g. blouse, 100% cottons, or
shirts)
•
Easily transformable clothes
•
Waterproofed clothes
1
Turn the POWER
and put the laundry in the wash tub.
2
Press
the
button to select the program.
•
you cannot select “SUPER SPIN DRY”.
•
You cannot use “AUTO TUB DRY” if “SUPER SPIN
DRY”
selected.
3
Press
the
button and select the desired time.
•
The “SUPER SPIN DRY” and “9 MIN” indicators will
light on and spinning time will display.
•
LED display shown
4
Press
the
button.
•
The pulsator will operate before the water is let into
the wash tub. The washer will estimate the amount of
laundry and display the detergent amount (while the
lid is open).
5
Put the detergent as the display and close the lid.
•
If the lid is open during the operation, the washer
will stop before rinsing and spinning.
After the operation:
the buzzer will beep when the washer
completes the operation.
•
Turn off the faucet and clean the cassette fi lter.
30
45
60
75
90
(off)
Select “SUPER SPIN DRY” only.
1
Turn the POWER
and put the laundry in the wash tub.
2
Press
button.
3
Press
for select time.
•
The “SUPER SPIN DRY” and “9 MIN” indicators will
light on and spinning time will display.
4
Close the lid and press the
button.
After the end of operation, there will be “beep” sound.
30
45
60
75
90
(off)
Select “SUPER SPIN DRY” from the
(WASH, RINSE, SPIN) cycle.
3
2
4
1
(77L) 79L
(21L) 21L
At the set of “BLANKET” “TUB CLEAN”
If the power supplies failure occurring while in operated, the washing
machine shall be memorized remains process. After the power
supplies are recovered, you can resume starting remain process by :
Press the
button to switch on the machine.
Observation: A sound will be heard about 5 seconds then
course and remains process indicator will blink.
Press the
button to start remain process.
