12
PRESET MODE
How to use preset mode
TO SET/RESET PRESET MODE
•
Turn the POWER off when you want to
delete memory. If you wish to change
preset time, turn the POWER off. And then
set to new preset time.
TO CONFIRM PRESET TIME
•
Display preset time when you open the lid
or press the PRESET button.
•
The
finished
times for the preset and the
actual times are different because of the
water pressure and the drainage condition.
1
Turn the POWER on.
Put the laundry in the basket and select your favorite cycle or water level.
Set the custom wash cycle.
2
Press the PRESET button to preset the time.
•
The displayed time can be changed from 2 to 12 hours by increasing
1 hour per press.
3
Press the
button.
•
Check if the faucet is on.
4
Put the detergent according to the detergent guide and then close
the lid.
DETERGENT (25g/30L)
Pull the detergent case, then
place the detergent evenly in the
case. Then shut the case.
LIQUID DETERGENT
Pour the liquid detergent into the
bleach dispenser.
RESUME FUNCTION
(POWER FAILURE RECOVERY)
If a power failure occurs during operation, the washer
memorizes the remaining process. After the electricity
recovers, you can resume it.
1 Turn the POWER on.
The progress and course indicators of the remaining
process will be flashing, and the
buzzer sounds
for 5 seconds.
2 Press the
button.
NOTE
•
For “PRESET MODE” , if the power failure occurs
before the machine starts operating, the machine
will cancel the preset time. Therefore, you have to
reset the time.
•
Press the button to clear the remaining process.
1
2
3
2
1
