Toshiba Activion 16 Product Data Download Page 9

9

Image storage and archiving

• The system is provided with a 217 Gbyte magnetic hard

disk as standard equipment, permitting the on-line stor-
age of approximately 100,000 images and 3,600 rota-
tions of raw data.

• A 9.4 Gbyte DVD-RAM disk drive is provided as stan-

dard equipment.  The image storage capacity of the
DVD-RAM disk is approximately 16,000 images per disk.

Image filming

• Filming of images can be performed manually or auto-

matically from the console.

• Automatic filming sends an entire study to the laser cam-

era.  Filming is performed in background mode so that
other scanner and image processing functions can be
performed without interruption or delay.

• When T-mode is used, related information items dis-

played together with an image (surrounding the image, in
a small font) are displayed in the footer area using a larg-
er font, permitting not only easier reading but also sim-
pler film management.

Note: To use T-mode, the laser imager must support 

2048 pixels x 2404 pixels for a 1 x 1 frame.

Patient throughput

Patient throughput and cost effectiveness were major
objectives in the design and production of the system.
• The system incorporates a 4.0-MHU X-ray tube with a

very fast cooling rate of 864 kHU/min in actual use.

• High-speed scans can be performed in as little as 0.75

second per scan.  

• Real-time reconstruction is possible in scanoscopy.
• CT images can be reconstructed in 0.5 second for 0.75-

second routine scans.

• Ease of operation is ensured by incorporating a hybrid

keyboard, mouse-driven menus, and a large color LCD
screen.

• The couch-top can be lowered very near the floor, simpli-

fying patient transfer.

COMPLIANCE

Council Directive 93/42/EEC
Concerning Medical Devices (Medical Device Directive)

• IEC:

IEC 60601-1: 1988
IEC 60601-1 Amd.1: 1991
IEC 60601-1 Amd.2: 1995
IEC 60601-1-1: 2000
IEC 60601-1-2: 2001
IEC 60601-1-3: 1994
IEC 60601-1-4 Ed.1.1: 2000
IEC 60601-2-28: 1993
IEC 60601-2-32: 1994
IEC 60601-2-44: Ed.2.1: 2002

DIMENSIONS AND MASS

SITING REQUIREMENTS

Power requirements

• Phase:

Three-phase

• Voltage:

200 V*

• Frequency:

50 Hz or 60 Hz ±0.5 Hz

• Line capacity:

75 kVA

• Voltage fluctuation 

due to load variation:

Less than 5%

• Power voltage 

fluctuation:

Less than 10%**

*

Please consult Toshiba in the case of other voltages or exces-
sive power fluctuation.

** Represents the total voltage fluctuation due to load and power

variation.

Grounding

Grounding must be provided in accordance with local 
regulations for medically used electrical equipment.

Unit

Dimensions  L 

×

×

H Mass

mm (in)

kg (lb)

Gantry

900 

×

2,070 

×

1,910

1,280

(35.4 

×

81.5 

×

75.2)

(2,822)

Patient 
couch

Long patient
couch version

Short patient
couch version

2,690 

×

630 

×

450

450

(105.9 

×

24.8 

×

17.7)

(94.1 

×

24.8

×

17.7)

(992)

2,390 

×

630 

×

450

420

(926)

CPU cabinet 1

815 

×

450 

×

700

100

(32.1 

×

17.7 

×

27.6)

(220)  

CPU cabinet 2

815 

×

450 

×

700

85

(32.1 

×

17.7 

×

27.6)

(187)  

MPDCT0290EA

Summary of Contents for Activion 16

















Reviews: