background image

4

Additional Safety Instructions

15. Do not overload wall outlets; extension cords, or integral 

convenience receptacles as this can result in a risk of fire 

or electric shock. 

16. Never  expose  the  apparatus  to  dripping  or  splashing  or 

place items such as vases, aquariums, any other item filled 

with liquid, or candles on top of the unit. 

17. Do not place the apparatus on amplifiers or equipment that 

may produce heat. 

18. Never block or cover the slots or openings in the unit. Never 

place the unit: 

•  on a bed, sofa, rug or similar surface;

•  too close to drapes, curtains, or walls; or 

•  in a confined space such as a bookcase, built-in cabinet, 

or any other place with poor ventilation. 

USA 

Federal Communications Commission Statement

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation 

is subject to the following two conditions: (1) This device may 

not cause harmful interference, and (2) This device must accept 

any interference received, including interference that may cause 

undesired operation.

FCC RF Radiation Exposure Statement

 

Caution:

 To maintain compliance with the FCC’s RF exposure 

guidelines, place the Audio Base Speaker System at least 20cm 

from nearby persons.

Interference

This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 

of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, and 

can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct 

the interference by one of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for 

help.

Bluetooth

®

 Wireless Technology and Your Health

The products with Bluetooth

®

 wireless technology, like other 

radio  devices,  emit  radio  frequency  electromagnetic  energy. 

The level of energy emitted by devices with Bluetooth

®

 wireless 

technology  however  is  much  less  than  the  electromagnetic 

energy emitted by wireless devices such as mobile phones. 

Because products with Bluetooth

®

 wireless technology operate 

within the guidelines found in radio frequency safety standards 

and recommendations, TOSHIBA believes Bluetooth

®

 wireless 

technology is safe for use by consumers.

These standards and recommendations reflect the consensus 

of  the  scientific  community  and  result  from  deliberations  of 

panels  and  committees  of  scientists  who  continually  review 

and interpret the extensive research literature.

In  some  situations  or  environments,  the  use  of  Bluetooth

®

 

wireless technology may be restricted by the proprietor of the 

building  or  responsible  representatives  of  the  organization. 

These  situations  may,  for  example,  include  in  any  other 

environment where the risk of interference to other devices or 

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of 

wireless devices in a specific organization or environment (e.g. 

airports), you are encouraged to ask for authorization to use 

the device with Bluetooth

®

 wireless technology prior to turning 

on the equipment.

The slots and openings are provided to protect the unit from 

overheating and to help maintain reliable operation. 

19. If the apparatus should emit smoke or an unusual odor, 

immediately disconnect the power cord from the wall outlet. 

Wait until the smoke or smell stops, then ask your dealer 

for a check and repair. Neglecting to do so may cause fire. 

20. During thunderstorms, do not touch the connecting cables 

or the apparatus. 

21. Warning: To prevent spread of fire, keep candles or other 

open flames away from this product at all times.

This  device  complies  with  Industry  Canada  Licence-exempt 

RSS-210. Operation is subject to the following two conditions: 

(1) this device may not cause interference, and (2) this device 

must accept any interference, including interference that may 

cause undesired operation of the device.

CAN ICES-3 (B) / NMB-3 (B)

ABX3250KN_IB_28-02-2014_L.indd   4

2014/2/28   17:08:47

Summary of Contents for ABX3250KN





















Reviews: