Toshiba A10 S129 - Satellite - Celeron 2.4 GHz User Manual Download Page 122

Page: 122 / 263

122

Mobile Computing

Changing the main battery

5.375 x 8.375 ver 3.1

the computer to enter Standby mode or Hibernation mode, or
to Turn Off or Shut down when the alarm goes off.

To set an alarm:

Click

Start

, then click

Control Panel

The Control Panel window appears.

Click

Performance and Maintenance

Click the

Toshiba Power Saver

icon.

The TOSHIBA Power Saver Properties window appears.

You can also access the TOSHIBA Power Saver Properties
window by using the TOSHIBA Console. See

“TOSHIBA

Console” on page 189

Choose the

Power Save Modes

tab, then under the

Running on Batteries section, click

Details

Click the

Alarm

tab and set the alarm, as desired.

Changing the main battery

When your battery power is running low, you have two
options—connect the computer to an AC power source or
install a charged battery.

If your battery discharges fully, your information will be lost.
Be sure to save your work often.

When handling a battery, be careful not to drop it or short-
circuit its terminals. Also, do not drop, hit or otherwise impact
the battery. Do not scratch or break the casing and do not twist
or bend the battery pack.

Do not remove the battery pack while the computer is in
Standby mode. Data in memory will be lost.

Summary of Contents for A10 S129 - Satellite - Celeron 2.4 GHz








































































































































































































































































Search results

Summary of Contents for A10 S129 - Satellite - Celeron 2.4 GHz

Reviews:

Related manuals for A10 S129 - Satellite - Celeron 2.4 GHz

Brands by name

Popular brands

Toshiba A10 S129 - Satellite - Celeron 2.4 GHz, User Manual

Search results

Summary of Contents for A10 S129 - Satellite - Celeron 2.4 GHz

Reviews:

Related manuals for A10 S129 - Satellite - Celeron 2.4 GHz

Brands by name

Popular brands