Toshiba 8000 series, User Manual

Page: 51 / 288

Part I: Getting to Know Your Computer
Using Your Computer in the Office
Using an external mouse
27
In TSETUP, this option is called Ext. Keyboard “Fn.” To find out
how to set the Fn Key Emulation option using TSETUP, see
“System Setup” on page 153.
Using an external mouse
You may want to use a mouse instead of the computer’s built-in
pointing device, the AccuPoint. You can use a serial mouse or a
PS/2-compatible mouse.
A serial mouse disables the AccuPoint. With a PS/2 mouse, you
can choose to have the AccuPoint active at the same time.
Setting up a PS/2 mouse to work with the AccuPoint in
Windows 95 and Windows 98
When you connect a PS/2-compatible mouse to the PS/2 mouse/
keyboard port, you may use the mouse, the AccuPoint or both.
CAUTION: When connecting any PS/2 device, Toshiba
recommends turning off your computer to prevent any
possible hardware damage.
To set the PS/2 mouse to work simultaneously with the
AccuPoint:
1 Click Start , Settings , then point to Control Panel .
2 Double click the Toshiba Hardware Setup icon.
3 Select the Pointing Devices Tab and click Simultaneous .
TECHNICAL NOTE: You can also set this using the “Pointing
Devices” setting in TSETUP.