background image

Intr

oduction

Connecting

y

our T

V

Using the

Remote Contr

ol

Setting up

y

our T

V

Using the T

V’s

F

eatur

es

Appendix

Index

61

Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.

THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.

PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.

PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.

Limited One (1) Year Warranty on Parts and Labor*

TCL warrants this television and its parts against defects in materials
or workmanship for a period of one (1) year after the date of original
retail purchase. 

DURING THIS PERIOD, TCL WILL, AT TCL’S

OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A
NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR
PARTS OR LABOR.

 TCL Authorized Service Depot personnel will

come to your home when warranty service is required. Depending
on the type of repair required, either the service will be performed in
your home or the set will be taken to the TCL Authorized Service
Depot for repair and returned to your home at no cost to you. 

IN-

HOME SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF
AN AUTHORIZED TCL SERVICE DEPOT.

Limited Two (2) Year Warranty on Picture Tube*

TCL warrants the picture tube in this television against defects in
materials or workmanship for a period of two (2) years after the date
of original retail purchase. 

DURING THIS PERIOD, TCL WILL, AT

TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE PICTURE
TUBE WITH A NEW OR REFURBISHED PICTURE TUBE
WITHOUT CHARGE TO YOU. LABOR CHARGES FOR PICTURE
TUBE REPLACEMENT ARE NOT COVERED UNDER THIS
WARRANTY AFTER ONE (1) YEAR FROM THE DATE OF THE
ORIGINAL RETAIL PURCHASE. 

TCL Authorized Service Depot

personnel will come to your home when warranty service is
required. Depending on the type of repair required, either the
service will be performed in your home or the set will be taken to
the TCL Authorized Service Depot for repair and returned to your
home at no cost to you. 

IN-HOME SERVICE ONLY APPLIES

WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL SERVICE
DEPOT.

Rental Units

The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.

*Limited Warranty for Commercial Units

TCL warrants televisions sold and used for commercial purposes as
follows: all parts are warranted against defects in materials or
workmanship for a period of ninety (90) days after the date of
original purchase. 

DURING THIS PERIOD, TCL WILL, AT TCL’S

OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A
NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU.
ON-SITE SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF
AN AUTHORIZED TCL SERVICE DEPOT.

Owner’s Manual and Product Registration

Read this owner’s manual thoroughly before operating this
television.

Register your product online at 

www.toshiba.ca

 as soon as

possible. By registering your product you will enable TCL to provide
you with better customer service and improved product support.
Failure to register your product does not diminish your warranty
rights.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:

(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be performed by an

Authorized TCL Service Depot.

(3) These warranties from TCL are effective only if the television is

purchased in Canada from an authorized TCL dealer and
operated in Canada.

(4) Labor charges for installation, setup, adjustment of customer

controls, and installation or repair of antenna systems are not
covered by these warranties. Reception problems caused by
inadequate antenna systems are your responsibility.

(5) Warranties extend only to defects in materials or workmanship

as limited above, and do not extend to any television or parts
that have been lost or discarded by you or to damage to the
television or parts caused by fires, misuse, accident, Acts of
God (such as lightning or fluctuations in electric power),
improper installation, improper maintenance, or use in violation
of instructions furnished by TCL; use or malfunction through
simultaneous use of this product and connected equipment; or
to units that have been modified or had the serial number
removed, altered, defaced, or rendered illegible.

How to Obtain Warranty Services

If, after following all of the operating instructions in this manual and
checking the “Troubleshooting” section, you find that service is
needed:
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s

web site at 

www.toshiba.ca.

(2) Present your bill of sale or other proof of purchase to the

Authorized Service Depot.

For additional information, visit TCL’s web site:

www.toshiba.ca

ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE
OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF
ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE REPAIR
OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TCL
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS
INTERRUPTION, OR MODIFICATION OR ERASURE OF
RECORDED DATA CAUSED BY USE, MISUSE, OR INABILITY TO
USE THIS PRODUCT).

No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which action must be
commenced to enforce any obligation of TCL arising under this
warranty or under any law of Canada or of any province thereof is
hereby limited to 90 days from the date you discover, or should have
discovered, the defect. This limitation does not apply to implied
warranties arising under the law of any province of Canada.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, LIMITATIONS ON
THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT, OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.

052704

Limited Canada Warranty

for 32'' and Larger Television Models

Summary of Contents for 65H14

































































Reviews: