background image

English

   - 5 -

you can add it to the 

Home

 menu. Same way you can 

delete or change the position of any item in the 

Home

 

menu. Press the Down direction button and select the 

delete

 

or move icon and press 

OK

. In order to move 

a menu item use the Right and Left direction buttons 

to select the position that you want the item to move 

to and press 

OK

.

2. TV
2.1. Guide

You can access the electronic programme guide menu 

using this option. Refer to 

Electronic Programme 

Guide

 section for more information.

2.2. 

Channels

You can access the 

Channels

 menu using this option. 

Refer to 

Using the Channel List

 section for more 

information.

2.3. 

Timers

You can set timers for future events using the options of 

this menu. You can also review the previously created 

timers under this menu.
To add a new timer select the 

Add Timer

 tab using the 

Left/Right buttons and press 

OK

. Set the sub-menu 

options as desired and when finished press 

OK

.

 

A new 

timer will be created. 
To edit a previously created timer, highlight that timer,  

select the 

Edit Selected Timer

 tab and press 

OK

Change the sub-menu options as desired and press 

OK

 to save your settings.

To cancel an already set timer, highlight that timer, 

select 

Delete Selected Timer

 tab and press 

OK

. A 

confirmation message will be displayed. Highlight 

Yes

 

and press 

OK

 to proceed. The timer will be cancelled.

It is not possible to set timers for two or more events 

that will broadcasted in different channels at the same 

time interval. In this case you will be asked to choose 

one of these timers and cancel others. Highlight the 

timer you want to cancel and press 

OK

,

 Options 

menu 

will be displayed. Then highlight 

Set/Cancel

 and press 

OK

 to cancel that timer. You will have to save changes 

after that. In order to do that press 

OK

, highlight 

Save 

Changes

 and press 

OK

 again.

2.4. 

Recordings

You can manage your recordings using the options 

of this menu. You can playback, edit, delete or sort 

previously recorded events. Highlight a tab by using 

the Left or Right direction button and press 

OK

 to see 

available options.

Recording Settings

You can also configure your recording preferences 

using the 

Settings

 tab in the 

Recordings

 menu. 

Highlight 

Settings

 tab by using 

Left

 or 

Right

 button 

and press 

OK

. Then select 

the desired 

item in the 

sub-menu and set by using 

Left

 or 

Right

 button.

Start early:

 You can set recording timer’s starting 

time to start earlier by using this setting.

End late:

 You can set recording timer’s end time to 

end later by using thi

s setting.

Max Timeshift:

 This setting allows you to set the 

maximum duration for the timeshift recording. 

Available options are approximate and the actual 

recording time may change in practice depending on 

the broadcast. The reserved and free storage space 

values will change according to this setting. Make 

sure that you have enough free space otherwise 

instant recording may not be possible.

Auto discard:

 You can set the 

Discard

 type as 

None

Oldest

Longest

 or 

Shortest

. If it is not 

set to 

None

, you can set the 

Unplayed

 option as 

Included

 or 

Excluded

. These options determine 

the preferences for deleting the recordings in order 

to obtain more storage space for ongoing records.

Hard disk information:

 You can view detailed 

information about the USB storage device connected 

to your TV. Highlight and press 

OK

 to see and press 

Back/Return

 to close.

Format Disk: 

If you want to delete all files on the 

connected USB storage device and convert the disk 

format to FAT32, you can use this option. Press 

OK

 

button while the 

Format Disk

 option is highlighted. 

A menu will appear on the screen, requiring you 

to enter the PIN

(*)

. After you enter the PIN, a 

confirmation message will be displayed. Select 

Yes

 

and press 

OK

 to start formatting the USB storage 

device. Select 

No

 and press 

OK

 to cancel. 

(*)

 Default PIN could have been set to 

0000

 or 

1234

. If you 

have defined the PIN(is requested depending on the country 

selection) during the 

First

 

Time

 

Installation

 use the PIN 

that you have defined.

3. 

Settings

You can manage the settings of your TV using the op-

tions of this menu. Refer to 

Settings Menu Contents 

section for more information.

4. 

Apps

When your TV is connected to the Internet related 

contents will also be available, including 

Apps 

related 

contents. Using the 

Apps

 menu you can access and 

manage your applications. You can add new apps from 

the market or delete the existing ones. Refer to 

Apps

 

section for more information.

5. 

Source

You can manage your input source references using 

the options of this menu. To change the current source 

highlight one of the options and press 

OK

5.1. 

Source S

ettings

Edit  the  names,  enable  or  disable  selected  source 

options.  There  are  also 

Regular

Enhanced

 and 

Disabled

 options available for HDMI sources. 

Regular

 

Summary of Contents for 55 X98 Series





































Reviews: