English
- 9 -
Connections
Connector
Type
Cables
Device
VGA
Connection
(bottom)
AUDIO IN
PC/YPbPr
Audio
Connection
(back)
YPbPr/PC Audio Cable
HDMI
Connection
(side&bottom)
SPDIF
SPDIF
(Optical Out)
Connection
(bottom)
BACK AV
Back AV
(Audio/Video)
Connection
(back)
Composite Audio Video Cable
HEADPHONE Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
Component Video (YPbPr ) Cable
USB
Connection
(side&back)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(bottom)
LAN / Ethernet Cable
Subwoofer
Connection
(back)(*)
To enable PC/YPbPr audio, you will
need to use the back audio inputs
with a YPbPr/PC audio cable for
audio connection. When using the
wall mounting kit (available from
a third party in the market, if not
supplied), we recommend that you
plug all your cables into the back of
the TV before mounting on the wall.
Insert or remove the CI module only
when the TV is SWITCHED OFF.
You should refer to the module
instruction manual for details of
the settings. The/Each USB input
of your TV supports devices up to
500mA. Connecting devices that
have current value above 500mA
may damage your TV. When con-
necting equipment using a HDMI
cable to your TV, to guarantee
sufficient immunity against parasitic
frequency radiation and trouble-free
transmission of high definition sig-
nals, such as 4K content, you have
to use a high speed shielded (high
grade) HDMI cable with ferrites.
If you want to connect
a device to the TV, make
sure that both the TV
and the device are turned off
before making any connection.
After the connection is done, you
can turn on the units and use
them.
(*)
For external subwoofer connection
