Toshiba 51HX84, Service Manual, Page: 23 / 46

- 23 -
Learning about the remote control
The buttons used for operating the TV only are described here. For a
complete list of the remote control’s functions, see the “Remote
Control functional key chart”.
POWER
turns the TV on and off
SLEEP
allows access to the automatic TV shut-off function
LIGHT
The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you’re in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100)
allow direct access to channels
MODE
cycles through the six device modes: TV, CABLE/SAT, VCR,
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds .
PIC SIZE
cycles through the five pictures sizes: Natural, Theater Wide 1,
2, 3, and Full
FAVORITE
allows access to the favorite channel search function
MENU
allows access to on-screen programming menus
ENTER
sets programming menu information
yz x •
select or adjust programming menus
FAV
yz
cycles through favorite channels
CH
yz
cycles through programmed channels
VOL
yz
adjusts the volume level
EXIT
exits the programming menus
INPUT
selects the video input source
MUTE
mutes the sound
RECALL
displays on-screen information
CH RTN
returns to the last viewed channels
POP CH
yz
selects the POP (picture-out-picture) channel
SPLIT
turns the POP feature on and off
CH SCAN
allows access to the programmed channel search function
FREEZE
freezes the picture. Press again to restore the picture.
SWAP
switches the main and POP pictures
POP DIRECT CH
allows direct access to POP channels
SOURCE
selects the POP picture source
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.