14
196 LCD Inst (E/F) Web 213:276
Connecting your TV
Connecting a camcorder
You will need:
• standard A/V cables
– For better picture performance, if your camcorder has
S-video, connect an S-video cable (plus the audio cables)
to
VIDEO 1
on the TV back instead of the
VIDEO 2
on the
TV right side panel.
To view the camcorder video:
Select the
VIDEO 2
video input source on the TV.*
*
To select the video input source, press
INPUT
on the remote control
(
-
Operating Guide
). To program the TV remote control to operate
other devices, see the
Operating Guide
, Chapter 2.
Connecting a digital audio system
The TV’s
DIGITAL AUDIO OUT
terminal outputs a Dolby
®
*
Digital
g
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby
®
Digital
decoder or other external audio system with optical audio
input.
You will need:
• optical audio cable (Use an optical audio cable that has the
larger “TosLink” connector and not the smaller “mini-
optical” connector.)
To control the audio:
1
Turn on the TV and the digital audio device.
2
Press
MENU
on the TV’s remote control and open the
Audio
menu.
3
Highlight
Audio Setup
and press
ENTER
.
4
In the
Optical Output Format
field, select either
Dolby Digital
or
PCM
, depending on your device
(
-
“Selecting the optical audio output format” in the
Operating Guide
).
5
Turn off the TV’s built-in speakers in the same
Audio
Setup
menu (for 42LX196 and 47LX196 only). Also see
“Turning off the built-in speakers” in the
Operating
Guide
.
Note:
•
Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers or headphones. THIS DAMAGE IS NOT COVERED
BY YOUR WARRANTY.
•
The
DIGITAL AUDIO OUT
terminal outputs signals only
when receiving digital broadcasts with the TV in single-
window mode.
•
The
DIGITAL AUDIO OUT
terminal may not output some
digital audio sources because of copy restrictions.
*
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are registered
trademarks of Dolby Laboratories.
VIDEO
AUDIO
OUT
L
R
VIDEO 2 inputs on TV right side panel
Camcorder
LINE IN
Optical
Audio IN
L
R
Dolby Digital decoder or
other digital audio system
TV lower back panel
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
Done
Audio Setup
MTS
Language
Speakers
On
Optical Output Format
Dolby Digital
Reset
Stereo
English
196LCD_Inst.book Page 14 Friday, May 26, 2006 11:19 AM
