Toshiba 43CJH9UR, Service Manual

Page: 8 / 58

GENERAL ADJUSTMENTS
– 8 –
LOCATION OF SCREEN AND FOCUS VR’S
To remove the Speaker grille and Front panel.
REPLACEMENT OF HIGH VOLTAGE CABLE
FOCUS VR’s
SCREEN VR’s
R G B
Front grill
ANODE LEAD
RUBBER BOOT
LEAD HOLDER
Fig. a
Z450 TPA5011AH
1. When replacing Anode Lead or Anode Cap with new
one, remove Lead Holder from old lead as shown in fig-
ure below, and put it on new lead. Do not throw away
Lead Holder.
NOTE : THE LEAD HOLDER IS ATTACHED TO
TPA5011AH (Z450), BUT IS NOT ATTACHED
TO ANODE LEAD AND ANODE CAP. RUBBER
BOOT IS ATTACHED TO ANODE LEAD AND
ANODE CAP.
2. Detaching Lead Holder
RUBBER BOOT
OLD
ANODE LEAD
or
ANODE CAP
LOCK
LEAD HOLDER
Cut here rubber boot
and lead together to
detach Lead Holder.
Fig. b