- 7 -
CAUTION : Never try to perform initialization unless you have changed the memory IC.
SERVICE MODE
1. ENTERING SERVICE MODE
1)
Press
button once on
2)
Press
button again and
3)
While pressing the
button,
Remote Control.
keep pressing.
press MENU button on TV set.
(Service mode display)
2.
DISPLAYING THE ADJUSTMENT MENU
1)
Press MENU button on TV.
Service mode
Adjustment mode
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Test signal selection :
button (on Remote)
Selection of the adjustment items :
Channel
▲
/
▼
(on TV or Remote)
Change of the data value :
Volume
+
/
−
(on TV or Remote)
Adjustment menu mode ON/OFF :
MENU button (on TV)
Initialization of the memory :
CALL
+
Channel button onTV(
▲
)
Reset the count of operating protect
circuit to "00" :
CALL
+
Channel button on TV (
▼
)
"RCUT" selection :
1 button
"GCUT" selection :
2 button
"BCUT" selection :
3 button
"CNTX" selection :
4 button
"COLP" selection :
5 button
"UVTT" selection :
6 button
Automatic A/D Adjustment(PC, Component) :7 button
Self diagnostic display ON/OFF :
9 button
or Sound Mute
Color thickness correction
note : Displayed differently as shown below, depending on
the setting of the receiving colorsystem.
COLP (PAL)
COLC (NTSC)
COLS (SECAM)
S
ADDR DATA
BINARY
0000H 00H
00000000B
S
ADDR DATA
BINARY
0000H 00H
00000000B
S
Press
Press
