AV connection
Back
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output
EXT 1
Woofer
INT.
Input selection and AV connections
15
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Select
AV connection
.
Use
S
or
R
to change the
EXT2 output
option to:
MONITOR
= The picture on screen.
TV
= The last television programme selection.
EXT 1
= The picture from equipment connected
to Scart 1.
EXT 3
= The picture from equipment connected
to Scart 3 or the side input sockets.
This specifies the type of signal going into Scarts 2 (
EXT2
)
or 3 (
EXT3
) on the back of the TV and the sockets on the
side (also
EXT3
). Please refer to the manufacturers
instructions for the connected equipment.
From the
Feature menu
select
AV connection
and with
S
or
R
select either
AV
or
S-VIDEO
as
the required
input
for
EXT2
and
EXT3
.
If the colour is missing try the alternative setting.
This enables selection of the source to
output
from
Scart 2. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
Scart 1 and stereo VCR to Scart 2, then select
EXT 1
as
the
EXT2 output
. The signal received through Scart 1 will
output directly through Scart 2.
Most VCRs and decoders send a signal through the Scart
lead to switch the TV to the correct
Input
socket.
Alternatively press the external source selection button
B
until the picture from connected equipment is shown.
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (
EXT4
).
An
S
e.g.
EXT2S
, indicates the input is set for an
S-Video signal.
Press
B
to select
EXT1
,
EXT2
,
EXT3
or
EXT4
.
EXT1
displays equipment connected to
Scart 1
.
EXT2
displays equipment connected to
Scart 2
.
EXT3
displays equipment connected to
Scart 3
on
the back of the TV or
Input 3
on the side of
the TV.
EXT4
displays equipment connected to the
COMPONENT VIDEO INPUT.
To return to TV mode press
B
again or one of
the numbered buttons.
Use the Input Selection if the TV does not switch over
automatically.
AV connection
Back
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output
EXT 1
Woofer
INT.
Input selection
INPUT signal selection
OUTPUT signal selection for Scart 2
1
1
1
2
2
