15
ADDITIONAL FEATURES
AV connections and input selection
Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.
Again, from the
Feature menu
select
AV
connection
.
Using the
S
or
R
buttons change the
EXT2
output
option to:
MONITOR
= The picture on screen
TV
= The last television programme selection.
EXT 1
= The picture from equipment connected
to Scart 1.
EXT 3
= The picture from equipment connected
to Scart 3 or the front input sockets.
2
1
Selecting the
OUTPUT
signal for Scart 2
Selecting the
INPUT
signal
This feature allows you to specify the type of signal going
into Scarts 2 (
EXT 2
) or 3 (
EXT 3
) on the back of the
television and the sockets on the front (which are also
EXT 3
). Please refer to the manufacturers instructions for
the connected equipment. If the colour is missing try the
alternative setting.
1
From the
Feature menu
select
AV connection
and
with the
S
or
R
button select either
AV
or
S-VIDEO
as the required
input
for
EXT2
and
EXT3
.
This feature enables you to select the source to
output
from Scart 2.
e.g.
If you connect a stereo decoder to
Scart 1 and a stereo video recorder to Scart 2, and
select
EXT 1
as the
EXT2
output (
i.e.
you will output
the signal received through Scart 1 directly out to
Scart 2), you will be able to record the stereo decoder
transmission in stereo.
Most video recorders and decoders send a signal
through the Scart lead to switch the TV to the correct
Input
socket. Alternatively press the external source
selection button
B
repeatedly until you see the picture
from your equipment. You must use this button to view
equipment connected using the COMPONENT VIDEO
INPUT (
EXT 4
).
An
S
e.g.
EXT2S
, indicates the input is set for an
S-Video signal.
…Please see page 20
for a clear view of the
back connection
recommendations…
Press the
B
button to bring up
EXT 1
on the
screen. This will display the signal coming in
through
Scart 1
.
Press the
B
button again to select the equipment
connected to
Scart 2
(
EXT 2
).
And press the
B
button again for
EXT 3
(
Scart 3
,
I
, on the back of the TV or
J
,
on the front of the TV) and again for
EXT 4
(Component Video Input).
To return to TV mode simply press one of the
numbered buttons on the remote control.
To view the external equipment once again,
simply press the
B
button until you see your
external source.
Input Selection
Using the Input Selection if the TV does not switch over
automatically.
1
2
3
4
AV connection
Back
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output
EXT 1
Woofer
EXT.
AV connection
Back
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output
EXT 1
Woofer
EXT.
