Toshiba 42AV500P, Service Manual

Page: 54 / 132

Status Check Mode
1. Press "9" button thrice on remote control during display of adjustment menu in the
service mode.
The status of this model will be checked.
2. During Status Check, the following displays are shown.
* Status check display and Item are subject to the models.
(2) EEPROM :
Version information of EEPROM : Display 1 byte data.
(3) SUB MPU :
Version information of SUB MPU : Display 1 byte data.
(4) OPTION :
Option information : Display six numbers of 1 byte data.
(5) A/D Adjust
A/D adjustment item.
--COMP : Component input
--RGB : PC input
--OK : A/D adjustment set correctly.
--NG : A/D adjustment set incorrect.
-- : A/D adjustment is not needed. Because its picture format isn't used.
(6) RF AGC adjustment value
RF Adjustment Value is shown.
(7) Model Name
Model name information (ascii code). : Display 7 byte data.
(8) LCD Panel Vendor information display
The following Panel Vendor (DDD) and screen size (00) are displayed.
Example : IPS-32 indicates that Vendor is IPS and Screen Size is 32 inch