Chapter 6: Using the TV’s features
56
Auto Setup
1無
Press
and
t
or
u
to select the
Setup
menu.
2無
Press
p
or
q
to highlight
Network Setup
then
press
.
3無
Press
q
to highlight
Auto Setup,
and then press
t
or
u
to select
On
(default).
Network Setup
Auto Setup
IP Address
Subnet Mask
MAC Address
On
255 . 255 . 255 . 0
133 . 123 . 108 . 157
Manual Setup
This setup requires the data listed below. You can get
this data from either your ISP or the configuration
utility for your DSL/cable modem or router.
1無
Press
and
t
or
u
to select the
Setup
menu.
2無
Press
p
or
q
to highlight
Network Setup
, and
then press
.
3無
Press
q
to highlight
Auto Setup
, and then press
t
or
u
to select
Off
.
4無
Press
q
to highlight
IP Address
field, and then
use the Number buttons on the remote control to
input the IP Address.
5無
Press
q
to highlight the
Subnet Mask
field, and
then use the Number buttons to input the Subnet
Mask.
6無
Press
.
Setting the sleep timer
You can set the sleep timer to turn off the TV after a
set length of time (maximum of 180 minutes).
To set the sleep timer using the remote control:
Press
on the remote control to set the length of
time until the TV turns off. Repeatedly press
to
increase the time in 10-minute increments, or press
p
or
q
to increase or decrease the time in 10-minute
increments, to a maximum of 180 minutes.
To set the sleep timer using the on-screen
menus:
1無
Press
and open the
Setup
menu.
2無
Highlight
Sleep Timer
and press
.
3無
Press the Number buttons to enter the length of
time in 10-minute increments.
4無
Highlight
Done
and press
.
Note:
When a power failure occurs, the
sleep timer setting may be cleared.
To display the remaining sleep time:
Press
.
Note:
A message will display on-screen when
there is one minute remaining on the sleep timer.
To cancel the sleep timer:
Repeatedly press
until it is set to 0 minute.
Using REGZA-LINK
®
This is a new feature that uses CEC technology
and allows you to control Toshiba REGZA-LINK
compatible devices from the TV remote via HDMI
connection (
page 17).
When the Enable REGZA-LINK in the REGZA-
LINK setup menu (
page 57) is set to
On
, the
following REGZA-LINK functions will be enabled.
REGZA-LINK
®
playback device (DVD
player, etc.) control
With your TV’s remote control, or using the REGZA-
LINK Player Control menu, you can control the
connected REGZA-LINK playback device you are
watching.
Available remote control key functions:
Before using the following key functions, first set the
MODE SELECT switch on the remote control to
TV
.
Button
Description
Begins playback.
Stops playback.
Pauses the picture during play or record
mode.
Skips forward.
Skips backward.
(continued)
40_46G300U1_EN-A5.indb 56
2010/3/2 上午 11:33:27
