Toshiba 40E200U2, Owner'S Manual

Page: 52 / 62

Chapter 7: Using the TV’s advanced features
52
Using CableClear
®
digital noise
reduction
The CableClear
®
digital noise reduction feature
allows you to reduce visible interference in your
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1無
Press and open the
Picture
menu, highlight
Noise Reduction
and press .
2無
In the
CableClear
field, select your desired setting.
Note :
•
If the current input is ANT/CABLE , VIDEO
1 , or VIDEO 2 , the menu will display the text
“CableClear.” The available selections are Off ,
Low , Middle , and High .
•
If the current input is
ColorStream HD
,
HDMI
1 , HDMI 2 , HDMI 3 or HDMI 4 , the menu will
display the text “DNR.” The available selections
are Off , Low , Middle , and High . Low , Middle ,
and
High
will reduce the noise in varying
degrees, from lowest to highest, respectively.
3無
To save the new settings, highlight
Done
and
press .
To revert to the factory defaults, highlight
Reset
and press .
Using MPEG noise reduction
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
Choices for MPEG noise reduction are
Off
,
Low
,
Middle
, and
High
.
Off
is automatically selected when
this feature is disabled (“grayed out”).
To select the MPEG noise reduction level:
1無
Press and open the
Picture
menu.
2無
Highlight
Noise Reduction
and press .
3無
Press
p
or
q
to highlight the
MPEG Noise
Reduction
field, and then press t or u to select
either
Off
,
Low
,
Middle
or
High
.
4無
To save the new settings, highlight
Done
and
press .
To revert to the factory defaults, highlight
Reset
and press .
Using 1080p PC Mode
You can use this function to output clear word image
on the TV screen, when a PC is connected to the HDMI
terminal.
Note: This function is available only for 1080p HDMI
input signal.
To turn on 1080p PC mode:
1無
Press and open the
Picture
menu.
2無
Highlight
Noise Reduction
and press .
3無
Press p or q to highlight the
1080p PC Mode
and then press
t
or
u
to select
On
and press .
To turn off 1080p PC mode:
Select
Off
in step 3 above.
Using the Game Mode feature
You can use the Game Mode feature for shorter frame
delays when playing a video game requiring split-second
timing between the on-screen display and input from the
controller (such as music creation and high-action games).
This feature is more effective for 480i and 1080i input
signals.
Note: To use the Game Mode feature, the current
video input must be Video 1 , Video 2 , ColorStream
HD , HDMI 1 , HDMI 2 , HDMI 3 or HDMI 4 . The Game
Mode cannot be turned on when any other video
input is selected.
To turn on Game Mode:
1無
Press and open the
Picture
m enu, highlight
the
Game Mode
.
2無
Press t or u to select
On
.
To turn off Game Mode:
Select
Off
in step 2 above, change the video input, or
turn the TV off and then on again.
Note: You can change the video input by
pressing on the remote control
(

page 29).
40E200U2_EN-2nd.indb 52 2010/3/31 上午 10:21:09