- 19 -
Initial Installation
Before switching on the television put your decoder and media recorder to
Standby
if they are connected
and ensure the aerial is connected to your television. To set up the television use the buttons on the remote
control as detailed on
page 13
.
IMPORTANT: Ensure that the aerial is connected and
a Common Interface module is not inserted before
switching on the TV for the
fi
rst time installation.
Connect the mains plug and switch the TV into
1.
on using the side standby switch. If the TV does
not switch on, press any numbered or standby
button on the remote control, then the language
selection menu will be displayed. This screen will
appear the
fi
rst time that the television is switched
on and each time the television is reset.
By pressing the
2. Up
or
Down
buttons highlight the
language you want to set and press
OK
button.
The following message will be displayed next:
By pressing
3. Left
or
Right
button, select the
country
you want to set and press
Down
button
to highlight the
Search Type
option. Use
Left
or
Right
to set the desired search type. Available
search types are Digital and analog, digital only
and analog only.
When set,
4. Down
buton to select Teletext
Language. Use
Left
or
Right
button to select
desired Teletext Language.
Press
5. OK
button on the remote control to continue
and the following message will be displayed on
the screen:
Select
6. Yes
by using
Left
or
Right
buttons and
press
OK
to continue.
The Auto tuning screen will appear and the
7.
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
Tthe following OSD will be displayed on the
screen and the television will search for digital
and analogue TV broadcasts:
Note: You can press
MENU
button to cancel.
After all the available stations are stored, Channel
•
List will be displayed on the screen. If you like the
sort channels, according to the LCN, please select
Yes
and then press
OK
(if available).
Press
•
OK
button to quit channel list and watch TV.
Note
:
Do not turn off the TV while initializing
fi
rst time
•
installation.
40BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 19
40BV702B_40BV705B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075900_10076100.indd 19
21.01.2012 17:57:33
21.01.2012 17:57:33
