Toshiba 32S255 Series, Owner'S Manual, Page: 2 / 45

- 2 -
S crews
( 4 x M4* 10 )
Follow the procedures below in order to assemble
the LED TV base
1. Before you begin to assemble the base, carefully
support the LED TV
,
with the front facing down,
on a flat and soft surface, such as a towel or
blanket. Allow for the lower part of the unit
to project outwards from the support and
assemble the base as follows.
Notes:
• Be careful when attaching the base to avoid
damage to the LED panel.
• Only use the screws provided with the
accessories.
2. Correctly screw the base to the TV, according to
the illustration.
Note:
In order to protect the TV, use the fastener to
mount the stand to the wall or any other fixed
structure.
3. Insert the stand into the TV. Use the mounting
screws to firmly attach the stand.
4.
After the stand is mounted to the TV , remove
the stand’s protective film.
Warning: Make sure that the power cable is not
caught or pinched when you attach the base,
because this can damage the cable and cause
electric shock.
Base assembly
S crews
Transition board
Stand
Bracket
Protective film in detail