108
Using the TV’s features
Using REGZA-LINK®
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
Setting up REGZA-LINK
®
To set the REGZA-LINK
®
Setup:
1
From the
Setup
menu, highlight
REGZA-LINK
®
Setup
and
press the
ENTER
button.
2
Press the ( / arrow) buttons to highlight
Enable
REGZA-LINK
®
.
3
Press the (
/
arrow) buttons to select
On
.
If you select Enable REGZA-LINK
®
Off, the other items will be grayed
out.
4
Press the ( / arrow) buttons to highlight the
REGZA-LINK
®
Setup
item you want to use, and press the
(
/
arrow) buttons to select
On
or the desired mode.
❖
TV Auto Input Switch:
On/Off
❖
TV Auto Power:
On/Off
❖
Device Auto Standby:
On/Off
❖
Speaker Preference:
TV Speakers/Audio Receiver
5
To save the new settings, highlight
Done
and press the
ENTER
button.
To revert to the factory defaults, highlight
Reset
and press the
ENTER
button.
Speaker
Preference
From this item, you can set your audio output preference to the TV speakers
or the audio receiver speakers. When this item is set to Audio Receiver, the
TV remote can be used to adjust or mute the volume of the audio. This item
will be grayed out unless a REGZA-LINK
®
compatible audio receiver is
connected.
Item:
Description:
NOTE
NOTE
