25
Connecting Your TV
Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream® or VCR
ColorStream
®
and composite video cables cannot be connected
simultaneously.
Items needed:
v
Coaxial cables
v
Standard AV cables
If you have a mono VCR, connect L/MONO on the TV to your
VCR’s audio out terminal using the white audio cable only.
v
Standard audio cables
v
Component video cables
v
You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to the
COLOR STREAM HD terminal in the TV. The COLOR
STREAM HD terminal can be used to display Progressive
(480p, 720p) and Interlaced (480i, 1080i) scan systems.
Please note that 1080p is not supported. Check the User’s
Guide of the DVD player in order to determine the best
output signal available.
v
If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to the
AUDIO/VIDEO terminal. If your DVD player has
HDMI
TM
video, see
device to the HDMITM input” on page 26
When you use ColorStream
®
HD or Video, switch AV input mode
appropriately.
To view antenna or Cable channels:
Select the
ANT/CABLE
video input source on the TV.*
To view the DVD player:
Turn on the DVD player. Select the
COLORSTREAM HD Video
input source on the TV.*
To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the
COLORSTREAM HD
Video
input source on the TV.*
To view the VCR or view and record antenna channels:
Turn on the VCR. Tune the VCR to the channel you want to watch.
Select the
VIDEO
video input source on the TV.*
To record a TV program while watching a DVD:
Turn on the VCR. Tune the VCR to the channel to record. Select the
COLORSTREAM HD Video
input source on the TV* to view the
DVD.
