Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
24
(
E
) 32HFX72 36HFX72
Adding channels to the TV’s memory
When you press Channel
y
or
z
, your TV will stop only on the
channels stored in the TV’s channel memory.
Follow the steps below and on the next page to program all active
channels into the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in its memory. After the channels are stored automatically,
you can manually add or erase individual channels (see below).
To program channels automatically:
1. Press MENU, and then press
x
or
•
until the SET UP menu
appears.
2. Press
y
or
z
until the TV/CABLE is highlighted.
3. Press
x
or
•
to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV; if you use
cable, highlight CABLE.
SET UP
LANGUAGE
CLOCK
ANT
ADD
ADD
ERASE
/
TV
CH PROGRAM
TV /
CABLE
/ CABLE
1
ANT 1
/ 2
SET
ENGL SH
I
0 0 : 0 0
T I LT CORRECT I ON
0
QU I CK CONNECT GU I DE
4. Press
z
to select CH PROGRAM.
SET UP
LANGUAGE
CLOCK
ANT
ADD
ADD
ERASE
/
TV
CH PROGRAM
CABLE
/ CABLE
1
ANT 1
/ 2
SET
ENGL SH
I
0 0 : 0 0
T I LT CORRECT I ON
0
QU I CK CONNECT GU I DE
5. Press
x
or
•
to start channel programming. The TV will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV is cycling through the channels, the message
“Programming Now—Please Wait” appears.
6. When channel programming is complete,the message
“Completed” appears.
7. Press Channel
y
or
z
to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press
x
or
•
until the SET UP menu
appears.
MENU
yzx
•
Channel
yz
Note:
To tune the TV to a channel not programmed
in the channel memory, you must use the
Channel Number buttons on the remote
control.
