background image

8

SETTING UP

Connecting an HDMI™ or DVI 
device to the HDMI input

The HDMI input on your television receives digital 
audio and uncompressed digital video from an 
HDMI source device, or uncompressed digital video 
from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth 
Digital-Content Protection) program material in digital form 
from EIA/CEA-861-D–compliant 

[1]

 consumer electronic 

devices (such as a set-top box or DVD player with HDMI or DVI 
output). For acceptable video signal formats, see page 9.

NOTE: 

• Some early HDMI equipment may not work properly with 

your latest HDMI TV, due to the adoption of a new standard. 

• Supported Audio format: Linear PCM, sampling rate 32/

44.1/48kHz.

Connect an HDMI cable (type A connector) to the HDMI 
terminal.

For proper operation, it is recommended that you use an HDMI 
cable with the HDMI Logo (

).

• HDMI cable transfers both video and audio. Separate analog 

audio cables are not required (see illustration).

• See “HDMI1 audio” on page 24.

To view the HDMI device video, press the 

o

 to select HDMI1 

or HDMI2 mode.

Connect an HDMI-to-DVI adapter cable (HDMI type A 
connector) to HDMI1 terminal and audio cables to the HDMI1 
Audio socket (see illustration).
• The recommended HDMI-to-DVI adapter cable length is 6.6 

ft (2m).

• An HDMI-to-DVI adapter cable transfers video only. 

Separate analog audio cables are required.

• See “HDMI1 audio” on page 24.

NOTE: 

To ensure that the HDMI or DVI device is reset properly, it is 
recommended that you follow these procedures:
• When turning on your electronic components, turn on the 

television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the 

HDMI or DVI device first, and then the television.

To connect an HDMI device

HDMI

 

OUT 

VIDEO  

AUDIO 

L R 

OUT 

IN 

HDMI cable

HDMI device

To connect a DVI device

DVI / HDCP 

OUT 

VIDEO  

AUDIO 

L R 

OUT 

IN 

HDMI-to- DVI adapter Cable

Audio cable for HDMI to 

television connection 

(not supplied)

DVI device

[1] EIA/CEA-861-D compliance covers the transmission of uncompressed 
digital video with high-bandwidth digital content protection, which is 
being standardized for reception of high-definition video signals. Because 
this is an evolving technology, it is possible that some devices may not 
operate properly with the television.
HDMI, the HDMI logo and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC.

00GB_AV500P_EngOM.book  Page 8  Tuesday, December 11, 2007  5:40 AM

Summary of Contents for 32AV500

































Reviews: