– 21 –
8. Removing the TN/AOUT, AV2 and Signal boards
1)
Remove the back cover. (Refer to Item 1.)
2)
Remove the top shield bracket. (Refer to Item 3.)
3)
Remove the Scaler board. (Refer to Item 5.)
4)
Remove the D-Rewrite board. (Refer to Item 6.)
5)
Remove the back plates. (Refer to Item 7.)
6)
Remove the connector [A] and 3 harnesses from the TN/AOUT board.
7)
Remove 5 screws (STP 3x8), then remove the TN/AOUT board.
8)
Remove the connector [B] from the Signal board.
9)
Remove 3 screws (STP 3x8), then remove the AV2 board.
10) Remove 1 screw (BIDT2 3x10BZ), then remove the AV2 panel.
11) Remove the 6 wire harnesses and 2 FFC from the Signal board.
12) Remove 5 screws (STP 3x8), then remove the Signal board.
Wire harnesses
AV2
board
SIGNAL board
TN/AOUT board
SIGNAL
board
Connector [A]
Connector [B]
AV2 panel
STP 3x8
STP 3x8
BIDT2 3x10 BZ
STP 3x8
Wire harness
Wire harness
Wire harness
FFC
FFC
Summary of Contents for 26HL84
Page 1: ...SERVICE MANUAL LCD Color Television 26HL84 FILE NO 020 200405 Jun 2004 YC X ...
Page 44: ... 49 50 SCALER BOARD PD1755B1 U903 TOP COMPONENT SIDE ...
Page 45: ...SCALER BOARD PD1755B1 U903 BOTTOM FOIL SIDE 51 52 ...
Page 50: ...TOSHIBA CORPORATION 1 1 SHIBAURA 1 CHOME MINATO KU TOKYO 105 8001 JAPAN ...
