Toshiba 26HL57, Owner'S Manual, Page: 29 / 52

29
HL57 (E/F) Web 213:276
Chapter 5: Setting up your TV
Setting the HDMI
™
audio mode
To set the HDMI audio mode:
1
Press
Y
and open the Set Up menu.
2
Highlight
AV Connection
and press
T
.
3
Press
B
or
b
to select HDMI1 Audio , and then press
C
or
c
to select the HDMI audio mode (
Auto
,
Digital
, or
Analog ). ( Auto is the recommended mode). See
“Connecting an HDMI or DVI device to the HDMI input”
(
-
page 15).
Note: Because the PC and HDMI1 inputs share the same set
of analog audio inputs, the PC/HDMI1 Audio setting
influences the HDMI1 Audio setting. If PC/HDMI1 Audio is set
to HDMI1 , the HDMI1 Audio setting changes to Auto . If PC/
HDMI1 Audio is set to PC , the HDMI1 Audio setting is set to
Digital and will be grayed out.
When the sound is not audible:
If no sound comes out while receiving HDMI signal, the sound
may be audible when using the Lip Sync Latency feature set to
off.
1
Press
Y
and open the
Set Up
menu.
2
Highlight AV Connection and press
T
.
3
Press
B
or
b
to highlight HDMI1 Audio .
4
Press and hold
T
for 5 seconds until the Lip Sync
Latency menu appears on the screen.
5
Press
C
or
c
to select
Off
.
6
Press
p
to turn the TV off and on again.
Note: Depending on the connected HDMI device, the sound
may be audible by turning it off and on again.
MENU Back Exit EXIT
PC/HDMI1 Audio
HDMI1 Audio
AV Connection
HDMI1
Auto
Lip Sync Latency On
26323742HL57_EN.book Page 29 Wednesday, March 14, 2007 4:28 PM