Toshiba 22AV700A, Owner'S Manual

Page: 16 / 48

15
Getting started
4 Select Auto Scan and press ► or .
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
Channels
Select Back Exit
EXIT
Scan
OK RETURN
5 Press Cancel for no change, or press to start Auto
Scan.
Previous settings will be lost ! Press
Cancel for no change, Press OK to start
Auto scan.
OK Cancel
Update Scan
Search the new channels that are not in the programme
list.
1 Press
and then press ◄ or ► to select SETUP .
2 Press ▲ or ▼ to highlight
Channels
. Press ► or
to enter.
3 Select Update Scan . Press to start Update Scan.
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
Channels
Select Back Exit
EXIT
Enter
OK RETURN
Note: This option is available for DVB_T only.
Single RF Scan
Scan single RF channel. You can check the Signal
Strength and the Signal Quality.
1 Select Channels from the SETUP menu.
2 Highlight Single RF Scan and press ► or to
enter.
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
Channels
Select Back Exit EXIT Enter OK RETURN
3 Press ◄ or ► to select the RF Channel . Press to
start scanning.
100
Single RF Scan
Back Scan Exit EXIT OK RETURN
Scan single RF channel. (Digital Only)
RF Channel
Signal Strength
signal Quality
8
Good
0%
Analogue Manual Scan
The television can be tuned-in manually using Analogue
Manual Scan
.
1 Press and then press ◄ or ► to select SETUP.
2 Press ▲ or ▼ to highlight Channels . Press ► or
to enter.
3 Select Analogue Manual Scan . Press ► or to
confirm.
Auto Scan
Update Scan
Analogue Manual Scan
Channel Skip
Channel Sort
Channel Edit
Analogue Channel Fine Tune
Channels
Select Back Exit
EXIT
Enter
OK RETURN
4 Use number buttons 0~9 to enter the Start
Frequency. Press ▲ or ▼ to select Scan Up or Scan
Down. Press ► or
to start scanning. Press RETURN to
stop scanning.
Analogue Manual Scan
Back Exit
EXIT RETURN
Search for analogue channels
Start Frequency (MHz) 175.25
Scan Up
Scan Down