Toshiba 20SLD1, Owner'S Manual

Page: 53 / 64

53
DVD Playback
Using the
TV/DVD’
s Features
Setting up
your TV/DVD
Connecting
your TV/DVD
Introduction
Appendix
SETUP
OK
DVD function setup
Customizing the function settings
You can change the default settings of the DVD mode to customize
performance to your preference.
Setting procedure
DVD VCD CD
1. Press SETUP during stop mode.
The following on-screen display appears.
2. Press or to select the desired section, then press .
3. Press or to select the desired option.
4. Then press or OK . The selectable settings will appear.
5. Change the selection using or , by referring to the correspond-
ing pages 54 to 55.
Press
OK to save the setting.
• Repeat steps 3 and 5 to change other option.
• To select another section, go back to step 2 by pressing
repeatedly.
6. To clear SETUP screen, press SETUP or repeatedly.
Option
On-screen
Disc Menu
Subtitle
Audio
TV Shape
Display
JPEG Interval
Picture Mode
D.R.C
Parental
Password
DivX(R) VOD
Default
Page
54
55
Parental : Off
Set Password
Output : Interlace
DivX(R) VOD
DRC : Off
QSound : On
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
On-screen ENG
Disc Menu ENG
Subtitle ENG
Audio ENG
Section
Digital audio out
To select a preferred parental level for the parental
setting.
Change a new user password.
To display your 8-character registration code.
Some function setting will be reset to the factory
setting.
To select the language of on-screen display .
Details
To select the language of “Disc Menu”, “Subtitle” and
“Audio” if more than one language are available on the
disc.
To select a picture size according to the aspect ratio
of your TV.
To turn On or Off the operational status display on the
screen.
To select a preferred setting for the slide show playback.
To select a preferred picture mode from “Video”, “Film”
or “Auto”.
To select On or Off for D.R.C (Dynamic Range Control).
To select the output sound format corresponding to
your system connection.
Note:
If the selection in the menu is grayed out, that means the feature is not
available or not possible to change at the current state.