64
Appendix
Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.
Symptom
Solution
TV will not turn on
•
Make sure the AC cord is connected securely and then press POWER.
•
The remote control batteries may be dead. Replace the batteries.
No picture, no sound
•
Check the antenna/cable connections.
No sound, picture OK
•
The sound may be muted. Press VOL +/–.
•
The station may have broadcast difficulties. Try another
channel.
•
The MTS feature may be in SAP mode. Select STR or MONO in the MTS
menu.
Poor sound, picture OK
•
The station may have broadcast difficulties. Try another channel.
•
The MTS feature may be in SAP mode. Select STR or MONO in the MTS
menu.
Poor picture, sound OK
•
Check the antenna connections.
•
The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Picture and sound are out of sync
As with all products that contain a digital display, in rare instances, when
viewing certain content (e.g., television broadcasts, video games, DVDs), you
may notice that the sound and picture are slightly out of sync. This
phenomenon can be caused by various factors including, without limitation,
video processing within the TV, video processing in an attached gaming
system, and video processing/different compression rates used by
broadcasters in their programming. You may want to try one or more of the
following suggestions, which may help to reduce the effect of this
phenomenon:
•
If the TV is connected to an external A/V device (e.g., DVD player, video
game system, set-top-box, etc.) always try to use the Color Stream video
jacks and corresponding audio jacks or the HDMI input (if available on your
TV) for connection to such external A/V device.
•
If the TV is connected to an A/V receiver that has a programmable audio
delay feature, use this feature to help synchronize the sound to the picture.
•
If connected to a video game system and your TV has the Game Mode
feature (see owner’s manual for more information), enable this feature.
•
If you notice this phenomenon only on cetain TV channels, please contact
your local broadcast, cable, or satellite provider to inform them of this issue.
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
•
Check the antenna connections.
Cannot receive above channel 13
•
Make sure TV/CABLE is set to CABLE mode.
Unable to select a certain channel
•
The channel may be blocked by the V-Chip feature or CH LOCK feature, or
erased with the add/erase feature.
Cannot access signal input sources (Video1,
•
Check the VIDEO LOCK feature.
Video2, ColorStream HD, HDMI and PC)
and/or Channels 3 and 4
Multiple images
•
The station may have broadcast difficulties. Try another channel.
•
Use a highly directional outdoor antenna.
Poor color or no color
•
The station may have broadcast difficulties. Try another channel.
•
Adjust the TINT and/or COLOR in the PICTURE menu.
Black box on screen
•
Select OFF in the Closed Caption menu to turn off the Closed Caption Text
mode.
No stereo or SAP sound from a
•
Make sure the MTS feature is set properly (AUDIO menu).
known MTS broadcast
The V-Chip password does not work
•
Change or reset your password.
(U.S. V-Chip system only)
The remote control does not operate
•
Remove all obstructions between the remote control and the TV.
•
The remote control batteries may be dead. Replace the batteries.
The top panel buttons do not operate
• Check the PANEL LOCK feature.
5X20301A(E)P64-Back
13/3/06, 5:24 PM
64