Toshiba 2010 User Manual Download Page 49

Page: 49 / 212

Getting Started

Using the computer for the first time

5.375 x 8.375 ver 2.3.2

Using the computer for the first time

For information on connecting devices, see

“Setting up your

computer” on page 40

Opening the display panel

Press the display panel latch and lift the display panel

Opening the display panel

CAUTION: To avoid damaging the display panel, don’t force it
beyond the point where it moves easily.
Never lift or move the computer using the display panel.

Turning on the power

If the optional external diskette drive is connected, check that
it is empty.

If you have a local printer connected to the computer, turn it
on and wait until the printer is ready (on line).

Summary of Contents for 2010





















































































































































































































Search results

Summary of Contents for 2010

Reviews:

Related manuals for 2010

Brands by name

Popular brands

Toshiba 2010, User Manual

Search results

Summary of Contents for 2010

Reviews:

Related manuals for 2010

Brands by name

Popular brands