2-4: CONTRAST CENTER
2-5: CONTRAST 40
1.
Place the set in Aging Test for more than 15 minutes.
1.
Place the set in Aging Test for more than 15 minutes.
2.
Receive the color bar pattern. (RF Input)
2.
Receive the color bar pattern. (RF Input)
3.
Using the remote control, set the brightness and
3.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
4.
Activate the adjustment mode display of
Fig. 1-1
and
4.
Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(50)
on the remote control to
press the channel button
(58)
on the remote control to
select "CONTRAST CENTER".
select "CONTRAST 40".
5.
Press the LEFT/RIGHT button on the remote control
5.
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "98".
until the contrast step No. becomes "138".
6.
Check if the picture is normal.
6.
Check if the picture is normal.
7.
Receive the color bar pattern. (VIDEO Input)
7.
Receive the color bar pattern. (VIDEO Input)
8.
Using the remote control, set the brightness and
8.
Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
9.
Press the INPUT ZOOM button on the remote
9.
Press the INPUT ZOOM button on the remote
control to set to the AV mode.
control to set to the AV mode.
Activate the adjustment mode display of
Fig. 1-1
and
10. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(50)
on the remote control to
press the channel button
(58)
on the remote control to
select "CONTRAST CENTER".
select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control
11. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "114".
until the contrast step No. becomes "149".
Check if the picture is normal.
12. Check if the picture is normal.
Receive the color bar pattern. (S-VIDEO Input)
13. Receive the color bar pattern. (S-VIDEO Input)
Using the remote control, set the brightness and
14. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
12.
13.
14.
10.
11.
ELECTRICAL ADJUSTMENTS
D-9
26LV610U
co t ast to o
a pos t o
co t ast to o
a pos t o
Press the INPUT ZOOM button on the remote
15. Press the INPUT ZOOM button on the remote
control to set to the AV(Y/C) mode. Then perform the
control to set to the AV(Y/C) mode. Then perform the
above adjustments 10~12.
above adjustments 10~12.
Receive the color bar pattern. (COMPONENT Input)
16. Receive the color bar pattern. (COMPONENT Input)
Using the remote control, set the brightness and
17. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
Press the INPUT ZOOM button on the remote
18. Press the INPUT ZOOM button on the remote
control to set to the COMPONENT mode.
control to set to the COMPONENT mode.
Activate the adjustment mode display of
Fig. 1-1
and
19. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(50)
on the remote control to
press the channel button
(58)
on the remote control to
select "CONTRAST CENTER".
select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control
20. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "115".
until the contrast step No. becomes "149".
Check if the picture is normal.
21. Check if the picture is normal.
Receive the color bar pattern. (HDMI Input)
22. Receive the color bar pattern. (HDMI Input)
Using the remote control, set the brightness and
23. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
Press the INPUT ZOOM button on the remote
24. Press the INPUT ZOOM button on the remote
control to set to the HDMI mode.
control to set to the HDMI mode.
Activate the adjustment mode display of
Fig. 1-1
and
25. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(50)
on the remote control to
press the channel button
(58)
on the remote control to
select "CONTRAST CENTER".
select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control
26. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "95".
until the contrast step No. becomes "129".
Check if the picture is normal.
27. Check if the picture is normal.
Playback the DVD(480i) disc.
28. Playback the DVD(480i) disc.
Press the INPUT ZOOM button on the remote
29. Press the INPUT ZOOM button on the remote
control to set to the DVD mode.
control to set to the DVD mode.
Using the remote control, set the brightness and
30. Using the remote control, set the brightness and
contrast to normal position.
contrast to normal position.
Activate the adjustment mode display of
Fig. 1-1
and
31. Activate the adjustment mode display of
Fig. 1-1
and
press the channel button
(50)
on the remote control to
press the channel button
(58)
on the remote control to
select "CONTRAST CENTER".
select "CONTRAST 40".
Press the LEFT/RIGHT button on the remote control
32. Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "112".
until the contrast step No. becomes "144".
Check if the picture is normal.
33. Check if the picture is normal.
30.
31.
32.
33.
24.
25.
26.
27.
28.
29.
18.
19.
20.
21.
22.
23.
15.
16.
17.
D-9
26LV610U