English
- 11 -
Select your
•
Country
,
Language
and
Text language
by
using the navigation buttons. Press
OK
or
RED
button to
continue. To cancel, press
BLUE
button. The following menu
will be displayed during the automatic tuning:
After APS is
fi
nalized, the programme table will appear
•
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Digital Manual Tuning
The feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known.
Select
•
Channel Search
from the
Installation menu
and
press
OK.
Enter the multiplex number using the numeric buttons.
•
The television will automatically search for that multiplex.
When the multiplex is found any channels not currently
on the programme list will be added and the programme
information at the top of the screen will be updated.
Repeat as necessary.
•
Note: Press
SOURC
E
button to switch between TV/DTV.
Analogue Manual Tuning
The television can be tuned-in manually. For example: if
the television cannot be connected to a media recorder/
decoder with a SCART lead or to tune-in a station on another
System.
To allocate a programme position on the television for a
decoder and media recorder: turn the decoder on, insert a
pre-recorded
fi
lm into the media recorder and press PLAY,
then manually tune.
Press
•
MENU
and using the Left or Right button
select
Install
menu.
Using the
•
Down
button select
Program
and key in the
programme position to be tuned with the number buttons,
we suggest
Programme 0
for a media recorder.
Use the Down button
•
to select
Search
then press the Left
or Right button to search. The television will begin searching
for channels.
Each signal will show on the television, if it is not your
•
media recorder press the
Left
or
Right
button to restart
the search.
When your media recorder signal is found, save the selection
•
by pressing the
Down
button until
Store
is highlighted, then
press the
Left/Right
or
OK
button to save.
Repeat for each
•
programme position
to be tuned then press
BACK
to
fi
nish.
Note
: Press
SOURCE
button to select between TV or DTV.
Auto Tuning
continued
, Manual Tuning
The television can be tuned-in manually using Manual Tuning feature.
00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 11
00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 11
17.05.2010 16:43:24
17.05.2010 16:43:24
