Basic playback
45
Disc playback
(continued)
Removing a disc
N
Press EJECT on the remote control.
EJECT
O
Wait for the disc to be ejected then remove the disc
from the slot.
Disc playback reminders
• If the unit does not operate properly, static electricity build-up may be the cause. Turn off the TV/DVD, then
disconnect the power cord from the AC outlet. Reconnect the power cord, then press POWER to turn on the
TV/DVD again.
• If an incompatible disc is loaded, one of the following error messages appears on-screen: “Incorrect Disc”, “Disc
region incorrect” or “Enter Password”. If this is the case, check your disc again. Go to page
for a list of supported
disc formats, and to page
for playback-related troubleshooting instructions.
• In some instances the unit may take a minute or so to start disc playback.
• When you load a disc with the playback side facing backward, “Reading” appears on-screen but it will be replaced
by “Incorrect Disc”. Eject the disc and load it again making sure the playback side is now facing forward.
• The Playback resume function may not work on some discs.
• Some DVDs may have fixed playback operations designed by the DVD manufacturer. Your TV/DVD follows this
fixed playback design. In such cases, some playback features may not be available. You may refer to the
instructions accompanying the DVD.
• Do not put any objects other than compatible discs on the disc slot. Doing so may cause damage to the unit.
• In many instances, a menu screen will appear after disc playback. Prolonged display of an on-screen menu may
damage your television set, permanently etching that menu image on the screen. To avoid this, turn off the TV/DVD
once disc playback is completed.
• There may be a few seconds between the action of pressing a button and the function it activates.
8
65
EJECT
POWER
