Toshiba 1410-S105 User Manual Download Page 57

Page: 57 / 271

Getting Started

Installing additional memory (optional)

5.375 x 8.375 ver 2.4.0

Removing the memory module

Gently pull the module out.

CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.

Complete the procedure by following steps 10 through 12
in

“Installing additional memory (optional)” on page 51

Checking total memory

When you add or remove memory, you can check that the
computer has recognized the change. To do this:

Click

Start

Control Panel

Click

Performance and Maintenance

Click

System

The

General

tab view automatically appears and shows

the recognized memory.

If the computer does not recognize the memory
configuration, turn off the computer, remove the memory
slot cover, and make sure the memory module is seated

Summary of Contents for 1410-S105
















































































































































































































































































Search results

Summary of Contents for 1410-S105

Reviews:

Related manuals for 1410-S105

Brands by name

Popular brands

Toshiba 1410-S105, User Manual

Search results

Summary of Contents for 1410-S105

Reviews:

Related manuals for 1410-S105

Brands by name

Popular brands