41 / 88
Copyright © 2012 - 2015 TOSHIBA TELI CORPORATION, All rights reserved. http://www.toshiba-teli.co.jp/index.htm
D4211908G
● Setting
- Set image size and image start position
Set the following value to “Width”, “Height”, “OffsetX”, “OffsetY” registers. Setting value is Integer type.
“Width”, “Height” registers are image size setting. “OffsetX”, “OffsetY” registers are image start position
setting.
Model
BG030 /
BG030C
BG031
BG080
BG130 /
BG130C
BG202 /
BG202C
Width unit size
160
160
256
160
160
Height unit size
60
60
96
60
60
OffsetX unit size
32
32
32
32
32
OffsetY unit size
12
12
12
12
12
Minimum unit size
160×60
160×60
256×96
160×60
160x60
Maximum unit size (*)
640×480
640×480
1024×768
1280×960
1600x1200
* initial factory setting
● Note
Changing “Width”, “Height”, “OffsetX”, “OffsetY” register value is invalid during image stream data output.
Notes on scalable mode:
White lines may occur in the upper portions of the screen when strong light exists in a wide area during the scalable
mode. This is not a malfunction. If white lines occur, adjust the amount of incident light using the lens.
