Torrot KidsE10, User Manual, Page: 20 / 32

20
KIDS
User Manual
ECU MAPPING
Apart from the power maps that can be selected with the switch
situated behind the number plate, the KIDS allows to programme
other power maps that fit to your tastes and necessities.
To programme the KIDS controller you will need a RS232 connector
(or an USB-to-RS232 converter and the appropriate drivers, in case
your PC does not have a RS232 port) and the Torrot ePower software
installed in a PC. This software can be downloaded in the webpage
www.torrotelectric.com.
Before connecting the computer to the controller ensure that your
motorbike is switched on but the motor has been turned off. That is,
the throttle must not be activated in any moment.
To access to the controller and to the RS232 connector you will
have to remove part of the fairing. Check the page 18 to see how it
can be disassembled. The controller is situated just behind the head
tube.
Once you have the cord connected to the computer and to the
controller, and you have turned on the computer and the motorbike,
open the software
1
1
THE EASIEST THING IS TO GO TO YOUR CLOSEST TORROT
ELECTRIC DEALER AND LET THEM CONFIGURE THE CONTROLLER
AS YOU WANT.