Torrot KidsE10, User Manual

Page: 21 / 32

21
KIDS
User Manual
ECU MAPPING
The Torrot ePower allows you to control three
parameters:
MAX MOTOR POWER
In this tab you can regulate the max power supplied
by the KIDS’ motor. 100% corresponds to full power
(1050W) and 0% corresponds to 0W.
ELECTRIC CLUTCH
This parameter regulates the how the motor
supplies the power when accelerating. The closer
to Fast, the more immediate will be the power
supply. To novel riders, is recommended to begin
with low values (Slow) that gives a more gradual
power supply.
REGEN. SYSTEM
This parameter regulates the electric brake of
the motor, that hold back the motor when stop
accelerating. For high values, the motor will slow
down faster. With a value of 0%, the motorbike will
roll free when the throttle is released.
When you have all the parameters as you want,
puss the ‘ OK ’ button. In this moment you will have
your KIDS ready with the new power map installed.
BEFORE CONNECTING THE COMPUTER TO THE CONTROLLER ENSURE THAT YOUR MOTORBIKE
IS SWITCHED ON BUT THE MOTOR HAS BEEN TURNED OFF. THAT IS,
THE THROTTLE MUST
NOT BE ACTIVATED IN ANY MOMENT
E
R
M