OPERATION’S DESCRIPTION
Turn your scale on pressing the
key. The general view finder will show
“------“ for few seconds. Then the general view finder will be in “zeros”. At
this moment the scale is ready to weight. Then place the product to weight
on the plate and you will see the weight in the alphanumeric indicator. The
“kg”, “lb” or “oz” symbol will appear in the indicator. For example, if you place
a product whose weight is 16 pounds, you will see the following:
When you wish to weight a product in a container and you do not want to
consider the container´s weight during the operation, you can use the “TARE”
function. To use this function, follow these steps: suppose you are going to
weight 10 pounds of some product in a container that weight 2 pounds.
1.
Place the empty container on the scale:
2. Press the
key. After some seconds the view
finder will display:
3. Put the product inside the container and the
scale shows only the weight of the product
without the container's weight. notice that when
you remove the container a negative number
(weight of container) appears in the general view
finder.
It is important to mention that this function is subtractive, for example if we
have a container that weight up to 2 pounds, the scale will only be able to
weight up to 18 pounds of product to complete the maximum capacity (to
PPC 10/20). To cancel the tare function remove the container and press the
TARE
key, the scale will return to the normal function. The “NET” symbol
will disappear.
How to weigh a product
How to use
Portioning scale
7
