This message indicates that a weight that exceeds the maximum capacity
has been placed on the scale. To correct this, simply remove the over
weight.
This message appears in two different situations:
a)When the scale is turned on with an excessive weight on the plate (more
than 50% of scale total capacity) to correct this situation remove the
weight that is on the scale, turn off the scale and then turn it on again.
b)When the scale was handled roughly and/or got hitted during the
shipment, which caused irreversible damages in operation. In this case call
your authorized distributor.
This message indicates a negative weight, this could happen if you lift or
remove the scale's plate. To correct these put the plated back in its place
and press the
key or turn the scale off and then turn it on again.
Other important messages that appear in the scale
Portioning scale
11
