
14
If the remaining run-time is more than 10 hours it is indicated in whole hours. If it is
less it is shown in hours and minutes. The GPS-module stops searching for a signal
if a signal is not detected within 5 minutes.
This icon is displayed if the tiller must be placed in the central position (stop positi-
on). This is necessary before starting off.
Is displayed if the motor or battery are too hot. In this case the motor reduces the
power independently to cool off.
Error: If an error occurs the error icon and a code are displayed in the bottom field. The
code informs about the component causing the error and the error itself. You will
find details about the error codes in the error message/trouble shooting chapter.
If the charge level falls below 30%, 3 beeps are emitted. The beep is repeated, if the char-
ging status falls below 20% and 10%. The beep is also emitted if the motor is turned on,
while the battery charge status is below 30%.
The tilt lever in the “Tilt/Auto kick-up” position (lever
up) enables the motor to be kicked up if it touches the
bottom. In this position it is not possible to reverse at
full speed or to stop the boat.
Automatic kick-up is switched off in the “Lock” (lever
down) position. This enables reversing at full speed.
7.3 Tilting the motor
tilt / Auto-
kickup
lock
Watch the charge status while operating the motor.
Summary of Contents for Travel 1003 S/L
Page 2: ......
Page 21: ...21 English 8 Dismantling 1 3 4 2 1 2 2 1 2 1 1 2 ...
Page 28: ...28 ...
Page 29: ...55 ...