Torqeedo 1966-00, Manual

Page: 10 / 52

10
1. Important information
The Display Gateway enables Torqeedo system data to be displayed on NMEA 2000 * com-
patible display devices. The display data currently transmitted (see Chapter 3) correspond
to the current possibilities of the standard. In the event of future extensions to the stan-
dard, these will be made available through a software update. Contact your Torqeedo part-
ner. Only data from Torqeedo components can be displayed using the Display Gateway.
This product requires no maintenance. To clean it use only a soft cloth and mild deter-
gents that are compatible with plastic materials (e.g. washing-up liquid). Do not use any
chemicals or solvents. Always use the latest version of the operating instructions.
You can find these and further information at www.torqeedo.com.
2. Assembly
- The Display Gateway, as shown on pages 4 and 5, is connected to the TorqLink
Backbone at any point using the supplied T-cable (connector A).
A: TorqLink Motor with TorqLink throttle
B: TorqLink Motor with aluminium throttle
C: TQ-Bus Motor with Power 48-5000
D: TQ-Bus Motor with Power 24-3500
E: TorqLink Twin-System
F: Power 48-5000 Power-Bank
*
NMEA 2000 is a registered trademark of the National Marine Electronics Association.
1. Cruise with TorqLink
1a. Port Motor
1b. Starboard Motor
2. Charger or fast charger
3. Power 48-5000 (2 x with Cruise 10.0)
4. Display Gateway Single
4a. Display Gateway Twin Port
4b. Display Gateway Twin Stb.
5. TorqLink throttle (1976-00)
6. NMEA 2000 feed
with fuse + switch
7. NMEA 2000 Display
8. NMEA 2000 Termination
9. Aluminium throttle
(1949-00, 1950-00, 1951-00)
10. TorqLink Terminator Single
11. Emergency stop
12. I/0 switch
13. Cruise without TorqLink (TQ-Bus)
14. TorqLink Gateway
15. Remote throttle (1918-00)
16. Emergency stop bridge
17. Power 24-3500
18. Double throttle (1952-00)
19. TorqLink Terminator Twin
20. Key switch