Figure 6
1.
Safety interlock symbols
3.
Battery light
2.
Hour meter
Throttle Control
The throttle control is variable between
Fast
and
Slow
.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage the
electric clutch to drive the mower blades with the motion
control levers in the center, un-locked position. Pull the
switch up to engage the blades and release. To disengage
the blades, push the blade control switch (PTO) down.
Neutral Lock Position
The neutral lock position is used with the safety interlock
system and to determine neutral position.
Ignition Switch
This switch is used to start the mower engine and has
three positions:
Start, Run
and
Off
.
Glow Plug Light (Orange Light)
The glow plug indicator light turns on when the ignition
switch is turned to the on position. When the light turns
off, the engine is ready to be started (Figure 5).
Temperature Light
The temperature light comes on when the engine is over
heating (Figure 5).
Audible Alarm
This machine has an audible alarm that alerts the user
to turn off the engine or engine damage can occur from
over heating. Refer to Servicing the Cooling System in
Maintenance.
Fuel Selector Valve
The fuel selector valve is located behind the left side
of the seat.
Close the fuel selector valve when transporting or
storing mower.
Move the selector valve to the lefthand (LH) or
righthand (RH) position for operation.
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
15
